EMX5016CF Powered Mixer Discontinued

Find a Dealer

		EMX5016CF
Outline
Mixing capability	Mixing channels	8 Mono + 4 Stereo +2 Return
	AUX	4 (incl. 2x Effect Send)
	MAIN	Stereo
	Input channel functions	CH1-8: HPF, Compressor, 3-band mid-sweep PEQ Insert I/O; CH9-16: HPF, 3 band PEQ
	On-board processors	2x SPX, 2x Digital 9-band GEQ, Feedback suppressor, Frequency response correction, Maximizer, YSProcessing
I/O	Mic inputs	12
	Phantom power	+48V DC; ON/OFF
	Line inputs	4x Stereo
	Control and others	2x Foot switch, Lamp
On-board amplifiers	Maximum output power @4ohms	500W/ch
	Maximum output power @8ohms	370W/ch (100V model), 350W/ch (120V model), 320W/ch (220-240V model)
	Output selection	500W, 200W, 75W; L/R, AUX1/MONO, AUX1/AUX2
General specifications
Total harmonic distortion		Less than 0.3%
Frequency response		0, +0, -3dB 20Hz-20kHz
Hum & noise level	Equivalent input noise	-128dBu
Hum & noise level	Residual output noise	-68dBu (Speaker out); -95dBu (Line out)
Crosstalk		-68dB
Protection circuit	Load protection	Power switch on/off mute, DC-fault (power supply shutdown/manual reset), Clip limiter (≧THD 1%; compression)
	Amplifier protection	Thermal (heatsink temp ≧90 degrees celsius; output mute/auto reset), Vl limiter (RL ≦2ohms)
	Power supply protection	Thermal (heatsink temp ≧100 degrees celcius; power supply shutdown/manual reset)
Cooling		2x Variable-speed fan
Power requirements		Depend on area of purchase; AC100V, 120V or 220-240V; 50/60Hz
Power consumption		500W
Dimensions	W	444mm; 17-1/2in
	H	155mm; 6-1/8in
	D	493mm; 19-7/16 (12U)
Net weight		11kg; 24.3lbs
Accessories		Owner’s Manual, AC power cord

Input Characteristics

Input Terminal	PAD	GAIN	Actual Load Impedance	For Use with Nominal	Input Level			Connector
Input Terminal	PAD	GAIN	Actual Load Impedance	For Use with Nominal	Sensitivity	Nominal	Max. before clip	Connector
CH INPUT A 1-8	0dB	-60dB	3kohms	50-600 ohm Mics	-80dBu	-60dBu	-40dBu	XLR-3-31 type ^*
	0dB	-16dB			-36dBu	-16dBu	+4dBu
	26dB	-34dB			-54dBu	-34dBu	-14dBu
	26dB	+10dB			-10dBu	+10dBu	+30dBu
CH INPUT B 1-8	0dB	-60dB	10kohms	600ohm Lines	-80dBu	-60dBu	-40dBu	TRS phone jack
	0dB	-16dB			-36dBu	-16dBu	+4dBu
	26dB	-34dB			-54dBu	-34dBu	-14dBu
	26dB	+10dB			-10dBu	+10dBu	+30dBu
ST CH MIC INPUT 9/10-15/16		-60dB	3kohms	50-600 ohm Mics	-80dBu	-60dBu	-40dBu	XLR-3-31 typek
ST CH MIC INPUT 9/10-15/16		-16dB	3kohms	50-600 ohm Mics	-36dBu	-16dBu	-10dBu	XLR-3-31 typek
ST CH LINE INPUT 9/10-15/16		-34dB	10kohms	600ohm Lines	-54dBu	-34dBu	-14dBu	Phone jack, RCA pin jack
ST CH LINE INPUT 9/10-15/16		+10dB	10kohms	600ohm Lines	-10dBu	+10dBu	+30dBu	Phone jack, RCA pin jack
CH INSERT IN (1-8)		-	10kohms	600ohm Lines	-20dBu	0dBu	+20dBu	Phone jack

* 0dBu= 0.775Vrms

Output Characteristics

Output Terminal	Actual Source Impedance	For Use with Nominal	Output Level		Connector
Output Terminal	Actual Source Impedance	For Use with Nominal	Nominal	Max. before clip	Connector
ST OUT [L,R]	150ohms	600ohm Lines	+4dBu	+20dBu	TRS phone jack
ST SUB OUT [L,R]	150ohms	600ohm Lines	+4dBu	+20dBu	TRS phone jack
AUX SEND 1,2	150ohms	600ohm Lines	+4dBu	+20dBu	TRS phone jack
EFFECT SEND 1,2	150ohms	600ohm Lines	+4dBu	+20dBu	TRS phone jack
CH INSERT OUT 1-8	600ohms	10kohm Lines	0dBu	+20dBu	TRS phone jack
REC OUT [L,R]	600ohms	10kohm Lines	-10dBV	+10dBV	RCA pin jack
PHONES [L,R]	100ohms	40ohm Lines	3mW	75mW	ST phone jack
SPEAKERS	0.1ohms	4ohm Speakers	125W	500W	speakON Phone jack

* 0dBu=0.775Vrms. 0dBV =1.0Vrms