﻿NU1XA Owner's Manual

Detailed Settings (Menu Display)
Pressing the [Menu] button opens one of the five menu displays (Voice, Song, Metronome, Recording and System). You can make settings for various functions from these menu displays.


Common Operations in the Menu Displays

1	As necessary, select the desired Voice or Song for editing.
For example, if you want to set Song playback parameters, such as Repeat, select the Song. If you want to set Voice related parameters, such as Chorus, select the Voice to add the effect.
(Figure)
[Menu] button
[Exit] button

2	Press the [Menu] button several times to select the desired menu.
Pressing the [Menu] button repeatedly will call up the following menu displays in order, according to the vertical menu at the left of the display. 
Voice menu (page 77) 
Song menu (page 81)
Metronome menu (page 84)
Recording menu (page 84)
System menu (page 85)

(Figure)
Menu icon
Menu name

3	Use the [Cursor up]/[Cursor down]/[Cursor left]/[Cursor right] buttons to select the desired parameter. 
While referring as needed to the parameter list on each page listed in step 2, use the [Cursor up]/[Cursor down] buttons to navigate through the display vertically and use the [Cursor left]/[Cursor right] buttons to navigate through display horizontally.
(Figure)

4	In the display called up in step 3, use the [Cursor up]/[Cursor down]/[Cursor left]/[Cursor right] buttons to select a value or execute the operation.
Most displays allow you to select a value by simply using the [Cursor up]/[Cursor down] buttons, although some, such as Edit in the “Song” menu and Backup in the “System” menu, let you execute an operation.
If a pop-up window is shown, set the value with the [Cursor left]/[Cursor right] buttons, then exit from the window using the [Exit] button.
Also, when the selected parameter provides only two options (on and off, for example), simply pressing the [Cursor right] button will alternate the value between the two options.
(Figure)

5	To exit from the menu display, press the [Exit] button.


Voice Menu
This menu lets you edit or set various parameters related to keyboard performance, such as Voice parameters. By turning on Duo, you can make the settings for each Voice or each Voice combination. While playing the keyboard and hearing the sound, change a parameter value to find your desired sound. Note that you should turn on Duo before calling up the “Voice” menu.

NOTE
Parameters with * are shown only when Duo (page 32) is on. 

(Table)
To call up the desired parameter:
Turn on Duo as necessary, select Voices as necessary, press the [Menu] button several times to select “Voice” menu, then use the [Cursor up]/[Cursor down]/[Cursor left]/[Cursor right] buttons to select the desired parameter.							
[Cursor right][Cursor left]	[Cursor right][Cursor left]		[Cursor right][Cursor left]		Description	Default setting	Setting range
Transpose	(Pop-up window)		–		Shifts the pitch of the entire keyboard up or down in semitone intervals to facilitate playing in difficult key signatures, and to let you easily match the pitch of the keyboard to the range of a singer or other instruments. For example, if you set this parameter to “5,” playing key C produces pitch F. In this way, you can play the F major song as if it were in C major.
NOTE
• The setting here will not affect Song playback. If you want to transpose Song playback, use the “Transpose” parameter in the “Song” menu (page 81).
• Your keyboard performance data will be transmitted with the transposed note numbers while MIDI note numbers received from an external MIDI device or computer will not be affected by the Transpose setting. 	0	−12 (−1 octave) – 0 (normal pitch) – +12 (+1 octave)
Piano Setting	Lid Position		(Setting display)		Refer to the description of “Lid Position” on page 24.		
	VRM		–		Refer to the description of “VRM” on page 24. Demo cannot be played in “Voice” menu.
NOTE
VRM is effective only for Voices in the Piano group.		
		Damper Res. (Resonance)	(Setting display)				
		Damper Noise	–				
		String Res. (Resonance)	(Setting display)				
		Duplex Scale Res. (Resonance)	(Setting display)				
		Body Res. (Resonance)	(Setting display)				
	Grand Exp. (Expression)		–		Refer to the description of “Grand Expression” on page 25. Demo cannot be played in “Voice” menu.
NOTE
Grand Expression Modeling is effective only for the Voices of “CFX Grand” and “Bösendorfer.”		
Reverb	(Setting display)		–		Determines the Reverb type which is applied to all the entire sound including the keyboard performance, Song playback and MIDI data input from an external MIDI device. 	Differs depending on the Voice or Voice combination.	Refer to the Reverb Type List (page 29).
Chorus	(Setting display)		–		Determines the Chorus type which is applied to all the entire sound including the keyboard performance, Song playback and MIDI data input from an external MIDI device. 	Differs depending on the Voice or Voice combination.	Refer to the Chorus Type List (page 80).
Voice Edit	(Voice names)*
* Shown when Duo is on (Upper: Right section Voice; Lower: Left section Voice)		Octave		Shifts the pitch of the keyboard up and down in octave steps. 	Differs depending on the Voice or Voice combination.	−2 (two octaves lower) – 0 (no pitch shift) – +2 (two octaves higher)
			Volume		Adjusts the volume for the selected Voice.	Differs depending on the Voice or Voice combination.	0 – 127
			Reverb Depth		Adjusts the Reverb depth for the selected Voice. The “0” setting will produce no effect.
NOTE
When a VRM Voice is used for several parts simultaneously, unexpected sounds may result since the Reverb depth for a part which has priority will become the common setting for the parts. During Song playback, setting for a Song part is used (priority order: Ch. 1, Ch. 2...Ch. 16), while the setting for a keyboard part is used when Song playback is stopped (priority order: Right section, Left section in Duo).	Differs depending on the Voice or Voice combination.	0 – 40
			Chorus Depth		Adjusts the Chorus depth for the selected Voice. The “0” setting will produce no effect.
NOTE
When a VRM Voice is used for several parts simultaneously, unexpected sounds may result since the Chorus depth for a part which has priority will become the common setting for the parts. During Song playback, setting for a Song part is used (priority order: Ch. 1, Ch. 2...Ch. 16), while the setting for a keyboard part is used when Song playback is stopped (priority order: Right section, Left section in Duo).	Differs depending on the Voice or Voice combination.	0 – 127
			Effect		In addition Reverb and Chorus, another Effect can be applied to the selected Voice. This lets you select the Effect type.	Differs depending on the Voice or Voice combination.	Refer to the Effect Type List (page 80).
			Rotary Speed		Available only for the Voice of which the Effect Type is set to “Rotary.” This parameter determines the rotation speed of the Rotary Speaker effect. 	Differs depending on the Voice or Voice combination.	Fast, Slow
			VibeRotor		Available only for the Voice of which the Effect Type is set to “VibeRotor.” This parameter turns on or off the VibeRotor effect. 	Differs depending on the Voice or Voice combination.	On, Off
				VibeRotor Speed	Available only for the Voice of which the Effect Type is set to “VibeRotor.” This parameter determines the speed of the Vibraphone vibrato effect. 	Differs depending on the Voice or Voice combination.	1 – 10
			Effect Depth		Adjusts the Effect depth for the selected Effect above. Note that some Effect types do not allow you to adjust the depth.	Differs depending on the Voice or Voice combination.	1 – 127
			Pan		Adjusts the stereo pan position for the selected Voice.	Differs depending on the Voice or Voice combination.	L64 (leftmost) – C (center) – R63 (rightmost)
Voice Edit	(Voice names)*

* Shown when Duo is on (Upper: Right section Voice; Lower: Left section Voice)		Harmonic Cont		Produces a distinctive “peaky” tone by raising the Resonance value of the Filter. 
NOTE
Harmonic content may have little audible effect or not be applied to some Voices.	Differs depending on the Voice or Voice combination.	−64 – +63
			Brightness		Adjusts the brightness of the selected Voice.	Differs depending on the Voice or Voice combination.	−64 – +63
			Touch Sens.		Determines the degree to which the volume level changes in response to your touch on the keyboard (how hard you play). Since the volume level of some Voices such as Harpsichord and Organ do not change regardless of how you play the keyboard, the default setting for these Voices is 127. 	Differs depending on the Voice or Voice combination.	0 (softest) – 64 (largest changes in the level) – 127 (which produces the loudest volume regardless of how you play the keyboard)
			RPedal		Turns the Right pedal function on or off for the selected Voice. This parameter is useful when you want to ensure, for example, that the pedal function affects the Right section but does not affect the Left section while playing in Duo.	Differs depending on the Voice or Voice combination.	On, Off
			CPedal		Turns the Center pedal function on or off for the selected Voice. This parameter is useful when you want to ensure, for example, that the pedal function affects the Right section but does not affect the Left section while playing in Duo.	Differs depending on the Voice or Voice combination.	On, Off
			LPedal		Turns the Left pedal function on or off for the selected Voice. This parameter is useful when you want to ensure, for example, that the pedal function affects the Right section but does not affect the Left section while playing in Duo.	Differs depending on the Voice or Voice combination.	On, Off
Pedal Assign	Right		(Setting display)		Assigns one of various functions (other than the original one) to the Right pedal. 	SustainCont	Refer to the Pedal Function List (page 80).
	Center		(Setting display)		Assigns one of various functions (other than the original one) to the Center pedal. 	Sostenuto	Refer to the Pedal Function List (page 80).
	Left		(Setting display)		Assigns one of various functions (other than the original one) to the Left pedal. 	Rotary Speed (Jazz Organ), Vibe Rotor (Vibraphone), Soft (other Voices)	Refer to the Pedal Function List (page 80).
Balance*	Volume L – R		(Pop-up window)		Adjusts the volume balance between the Right and Left sections when using the Duo function (page 32). After adjusting via the [Cursor left]/[Cursor right] buttons, press the [Exit] button to exit from the pop-up window.	Differs depending on the Voice or Voice combination.	L+10 – 0 – R+10
(Table end)

Chorus Type List 
(Table)
Off	No effect
Chorus	Adds a rich, spacious sound.
Celeste	Adds swell and a spacious sound.
Flanger	Adds swell effects similar to the sound of an ascending or descending jet plane.
(Table end)

Effect Type List 
(Table)
Off	No effect
DelayLCR	Delay applied at left, center, and right positions.
DelayLR	Delay applied at left and right positions.
Echo	Echo-like delay
CrossDelay	Left and right delays cross each other in alternation.
Symphonic	Adds a rich and deep acoustic effect.
Rotary	Adds the vibrato effect of a rotary speaker.
Tremolo	The volume level changes in rapid cycles.
VibeRotor	The vibrato effect of a vibraphone.
AutoPan	The sound pans left to right and back and forth.
Phaser	The phase changes periodically, swelling the sound.
AutoWah	The center frequency of the wah filter changes periodically.
Distortion	Distorts the sound.
(Table end)

Pedal Function List 
(Table)
Function	Description	Available pedal (O: Can be assigned, ×: Cannot)		
		Left pedal	Center pedal	Right pedal 
Sustain (Switch)	On/off switch type damper	O	O	O
Sustain Continuously	Damper that sustains the sound proportionately to how deeply you press the pedal (page 19)	×	×	O
Sostenuto	Sostenuto (page 19)	O	O	O
Soft	Soft (page 19)	O	O	O
PitchBend Up*	A function that smoothly raises the pitch	×	×	O
PitchBend Down*	A function that smoothly lowers the pitch	×	×	O
Rotary Speed	Changes the rotational speed of the Jazz Organ rotary speaker (switches between fast and slow each time you press the pedal)	O	O	O
VibeRotor	Switches the vibraphone vibrato on/off (switches on/off each time you press the pedal)	O	O	O
(Table end)


Song Menu
This menu lets you set various parameters related to Song playback and edit the Song data. Select a desired Song before beginning the operation.

NOTE
• The parameters marked with * will be available only when a MIDI Song is selected. These parameters are not shown when an Audio Song is selected.
• The parameters marked with ** will be available only when an Audio Song is selected.
• When using the “Edit” menu, select a MIDI Song other than the preset Song.
• Execute is a function that edits or changes the current Song data. Note that pressing the [Cursor right] button will actually change the Song data.
• The content of the “Song” menu differs depending on the type of Song currently selected (MIDI/Audio).

(Table)
To call up the desired parameter:
Select a Song as necessary, press the [Menu] button several times to select “Song” menu, then use the [Cursor up]/[Cursor down]/[Cursor left]/[Cursor right] buttons to select the desired parameter.					
[Cursor right][Cursor left]	[Cursor right][Cursor left]	[Cursor right][Cursor left]	Description	Default setting	Setting range
L/R*	R, L, Extra	–	Turns on (Play) or off (Mute) each of the Song tracks. For details, refer to page 40. 	On	On, Off
Repeat	A ­ B*	(Setting display)	Lets you play back a specified range (from Point A to B) of the current Song repeatedly. For instructions, refer to page 41. 	Off	On, Off
	Phrase*	Phrase Mark	This parameter is available only when a MIDI Song containing the Phrase Mark. By specifying a Phrase number here, you can play back the current Song from the mark point, or to play back the corresponding phrase repeatedly. If you start Song playback with a Phrase set to “On,” the countdown starts, followed by repeated playback of the specified phrase or phrases until you press the [PLAY/PAUSE] button. 	000	000 – the last phrase number of the Song
		Repeat		Off	On (repeat playback)/Off (no repeat)
	Song	(Setting display)	By setting this parameter, you can play back only a specific Song, or specific Songs in order repeatedly or randomly. For details, refer to page 41.	Off	Off, Single, All, Random
Volume	Song – Keyboard*	(Pop-up window)	Adjusts the volume balance between the Song playback sound and keyboard performance.	0	Key+64 – 0 – Song+64
	Song L – R*	(Pop-up window)	Adjusts the volume balance between the right-hand part left-hand parts of Song playback.	0	L+64 – 0 – R+64
	(Pop-up window)**		Adjusts the Audio volume.	100	0 – 127
Transpose	(Setting display)	–	Shifts the pitch of Song playback up or down in semitone intervals. For example, if you set this parameter to “5,” a Song created in C major will be played back in F major.
NOTE
• The Transpose setting will not affect the audio input sound (via Bluetooth, [AUX IN], etc.) from the external device (page 46).
• MIDI Song playback data will be transmitted with the transposed note numbers while MIDI note numbers received from an external MIDI device or computer will not be affected by the Transpose setting. 
• Applying transpose to an Audio Song may change its tonal characteristics.	0	−12 (−1 octave) – 0 (normal pitch) – +12 (+1 octave)
File	Delete	Cancel	Deletes a specific Song. For details about Song types which can be deleted, refer to page 57.	–	–
		Execute		–	–
	Copy*	Cancel	Copies a specific MIDI Song then saves it to a different location. For details about Song types which can be copied, refer to page 57.	–	–
		Execute		–	–
File	Move*	Cancel	Moves a MIDI Song to a different location. For details about Song types which can be moved, refer to page 57.	–	–
		Execute		–	–
	MIDI to Audio*	Cancel	Converts a MIDI Song to an Audio file. For details about Song types which can be converted, refer to page 57.	–	–
		Execute		–	–
	Rename	(Setting display)	Edits a Song name. For details about Song types which can be renamed, refer to page 57.	–	–
Edit*	Quantize	Quantize	The Quantize function allows you to align all the notes in the current MIDI Song to the correct timing, such as 8th note or 16th note.
1. Set the Quantize value to the smallest notes in the MIDI Song.
2. Set the Strength value which determines how strongly the notes will be quantized.
3. Move the highlight to “Execute” then press the [Cursor right] button to actually change the MIDI Song data. 	1/16	Refer to “Quantize setting range.” (page 83)
		Strength		100%	0% – 100%
Refer to “Strength setting range.” (page 83)
		Execute		–	–
	Track Delete	Track	Deletes a specific track data of the current MIDI Song.
1. Select the desired track to be deleted.
2. Move the highlight to “Execute,” then press the [Cursor right] button to actually delete the specified track data.	Track 1	Track 1 – Track 16
		Execute		–	–
	Tempo Change	Cancel	Changes the tempo value of the current MIDI Song as data. Before calling up the “Song” menu display, set the desired Tempo value for changing.
Move the highlight to “Execute,” then press the [Cursor right] button to actually change the Tempo value as MIDI Song data. 	Differs depending on the Song	–
		Execute		–	–
	Voice Change	Track	Changes the Voice of a specific track in the current MIDI Song to the current Voice as data.
1. Select a track of which the Voice will be changed.
2. Move the highlight to “Execute,” then press the [Cursor right] button to actually change the Voice as MIDI Song data. 	Track 1	Track 1 – Track 16
		Execute		–	–
Others**	Quick Play	–	This parameter enables you to specify whether a Song that starts from the middle of a bar, or a Song with a silence prior to the first note, should be played from the first note or from the top of the bar (rest or blank). This parameter is useful for a MIDI Song that starts with a short one-or two-beat pick-up or lead-in.	On	On, Off
	Track Listen	Track	This lets you play back only the selected Track to listen to its contents. To do this, select a Track, move the highlight to “Start,” then press and hold the [Cursor right] button to start playback from the first note. Playback continues while holding the [Cursor right] button. 	Track 1	Track 1 – Track 16
		Start			
	Play Track	–	This parameter enables you to specify the tracks for playing back on this instrument. When “1&2” is selected, only tracks 1 and 2 will be played back, while tracks 3 to 16 will be transmitted via MIDI. When “All” is selected, all tracks will be played back on this instrument.	All	All, 1&2
(Table end)

NOTE
Tempo of Song playback can be set on the display called up by pressing the [TEMPO] button. For instructions, refer to page 39.

Quantize Supplementary

Quantize setting range 
(Figure)
1/4	quarter note
1/6	quarter note triplet
1/8	eighth note
1/12	eighth note triplet
1/16	sixteenth note
1/24	sixteenth note triplet
1/32	thirty-second note
1/8+1/12	eighth note + eighth note triplet*
1/16+1/12	sixteenth note + eighth note triplet*
1/16+1/24	sixteenth note + sixteenth triplet*

The three Quantize settings marked with asterisks (*) are exceptionally convenient, since they allow you to quantize two different note values at the same time. For example, when the straight eighth notes and eighth notes triplet are contained in the same part, if you quantize by straight eighth notes, all notes in the part are quantized to straight eighth notes—completely eliminating any triplet feel. However, if you use the eighth note + eighth note triplet setting, both the straight and triplet notes will be quantized correctly.

Strength setting range 
(Figure)
Quarter-note length
Original data 
Quantizing strength = 100 
Quantizing strength = 50


Metronome Menu
This menu lets you set the volume and tempo indication format of the Metronome (page 34). Regarding “Time Signature” and “Bell,” these are also described on page 35.

(Table)
To call up the desired parameter:
Press the [Menu] button several times to select “Metronome” menu, then use the [Cursor up]/[Cursor down] buttons to select the desired parameter.					
[Cursor right][Cursor left]	[Cursor right][Cursor left]	[Cursor right][Cursor left]	Description	Default setting	Setting range
Time Sig.
(Time Signature)	(Setting display)	–	Determines the time signature of the metronome. When you select or playback MIDI Songs, this will automatically be changed to the time signature of the selected songs.	4/4	2/2, 3/2, 1/4, 2/4, 3/4, 4/4, 5/4, 6/4, 7/4, 3/8, 6/8, 7/8, 9/8, 12/8
Volume	(Pop-up window)	–	Determines the volume of the Metronome or Rhythm. You can adjust the volume balance between the keyboard performance and Metronome/Rhythm playback. 	82	0 – 127
BPM	–	–	Determines whether the note type of the tempo indication is affected by the Metronome Time Signature (page 35) or not (crotchet). When “Time Sig.” is selected, the denominator of the Time Signature is shown as the note type of the tempo indication. (The dotted quarter note is shown as the note type of the tempo indication only when the Time Signature is set to “6/8,” “9/8,” or “12/8.”)	Time Sig.	Time Sig., Crotchet
Bell	–	–	Determines whether or not the bell sound is played back at the first beat of the specified Time Signature.	Off	On, Off
(Table end)


Recording Menu
This menu lets you make detailed settings related to MIDI Recording (page 46).

NOTE
The settings here will not affect Audio Recording. 

(Table)
To call up the desired parameter:
Press the [Menu] button several times to select “Recording” menu, then use the [Cursor up]/[Cursor down] buttons to select the desired parameter.					
[Cursor right][Cursor left]	[Cursor right][Cursor left]	[Cursor right][Cursor left]	Description	Default setting	Setting range
RecStart	–	–	This parameter, which is used when you overwrite the already recorded MIDI Song, determines when the actual MIDI Recording starts after you execute the Recording Start operation. When set to “Normal,” actual recording will starts as soon as you execute the Recording Start operation. When set to “KeyOn,” actual recording starts as soon as you press any key after you execute the Recording Start operation. 	Normal	Normal, KeyOn
RecEnd	–	–	This parameter, which is used when you overwrite the already recorded MIDI Song, determines whether the existing data after the point at which you stop recording will be erased or not. 	Replace	Replace, PunchOut
(Table end)


System Menu
This menu lets you make the overall settings applied to the entire instrument.

NOTE
Parameters marked with * are available only if the instrument is equipped with Bluetooth functionality.

To call up the desired parameter:
Press the [Menu] button several times to select “System” menu, then use the [Cursor up]/[Cursor down]/[Cursor left]/[Cursor right] buttons to select the desired parameter.
[Cursor right][Cursor left]	[Cursor right][Cursor left]		[Cursor right][Cursor left]	Description	Default setting	Setting range
Bluetooth*	Bluetooth		–	Switches the Bluetooth function on/off (page 69).	On	On, Off
	Pairing		–	For registering (pairing) the Bluetooth equipped-device (page 68). This parameter is shown only when “Bluetooth” (above) is set to “On.”	–	–
Tuning	Master Tune		(Pop-up window)	Fine tunes the pitch of the entire instrument. This function is useful when you play this instrument along with other instruments or CD music.
NOTE
These settings will not be applied to the Audio Song. Also, these settings will not be recorded to a MIDI Song.	440.0 Hz (=A3)	414.8 Hz – 466.8 Hz (approx. 0.2 Hz steps)
	Scale Tune		(Setting display)	Modern acoustic pianos are tuned almost exclusively in equal temperament, which divides one octave into twelve equal intervals. Likewise, this digital piano employs equal temperament, but it can be changed at the touch of a button to play in historical temperaments used in the 16th to 19th centuries.	Equal	Refer to the “Scale Tune List” (page 89)
	Base Note		(Setting display)	Determines the base note for the Scale selected above. When the base note is changed, the pitch of the keyboard is transposed, yet maintains the original pitch relationship between the notes. This setting is necessary when Scale Tune is set to something other than “Equal Temperament.”
NOTE
When Scale Tune is set to “Equal Temperament,” “---” is shown on the display and this parameter cannot be edited.	C	C, C sharp, D, E flat, E, F, F sharp, G, A flat, A, B flat, B
Keyboard	Touch		(Setting display)	Determines how the sound responds to your playing strength. This setting does not change the weight of the keyboard. 
• Soft2: Produces relatively high volume even with light playing strength. Best for players with a light touch.
• Soft1: Produces high volume with moderate playing strength.
• Medium: Standard Touch Sensitivity.
• Hard1: Requires moderately strong playing for high volume.
• Hard2: Requires strong playing to produce high volume. Best for players with a heavy touch.
• Fixed: No touch response. The volume level will be the same regardless of how hard you play the keys. 
NOTE
The setting here will not be recorded to a MIDI Song and not be transmitted as MIDI messages. 	Medium	Soft 2, Soft 1, Medium, Hard 1, Hard 2, Fixed
	Fixed Velocity		(Pop-up window)	Determines the velocity with which you play the keys when Touch (above) is set to “Fixed.” 
NOTE
The setting here will not be recorded to a MIDI Song and not be transmitted as MIDI messages.	64	1 – 127
	Duo		(Setting display)	Splits the keyboard into two ranges, allowing you to play duets over the same octave range (page 32).	Off	On, Off
Keyboard	Duo - Type		–	Selects the sound balance between the left and right speakers while Duo is on.
• Separated: The sound of the Left section is output from the left speaker(s), and the sound of the Right section is output from the right speaker(s).
• Balanced: The sounds played on the Right and Left sections are output through both speakers, with a natural balance of sound.	Separated	Separated, Balanced
	Split Point		(Setting display)	Determines the Split Point (the boundary between the Right section and Left section).	E3	A−1 – C7
Pedal	Half Pedal Point		(Pop-up window)	Here you can specify the point to which you must depress the right pedal before the assigned effect begins to be applied. This setting applies only to the “Sustain Continuously” effect (page 80) that is assigned to the right pedal.	0	−2 (effective with the shallowest press) – 0 – +4 (effective with the deepest press)
	Soft Pedal Depth		(Pop-up window)	Determines how deeply the Soft pedal effect is applied. This parameter is available only for the pedal to which “Soft” (page 80) is assigned. 	5	1 – 10
	Pitch Bend Range		(Pop-up window)	Determines the range of the pitch bend that is produced via the pedal in semitone steps. This setting is available only for the pedal to which “Pitch Bend Up” or “Pitch Bend Down” (page 80) is assigned.
NOTE
For some Voices, the pitch may not be changed according to the Pitch Bend Range value set here.	2	0 – +12 (pressing the pedal will raise/lower the pitch by 12 semitones [1 octave])
	Play/Pause		(Setting display)	Assigns the [PLAY/PAUSE] button’s function to the Left pedal or the Center pedal. If a value other than “Off” is selected here, the corresponding pedal's function assigned in the “Voice” menu (page 79) is disabled.	Off 	Off, Left, Center
Sound	Brilliance		(Setting display)	Adjusts the overall brilliance of sound for this instrument. You can also select “User” to make your own custom EQ settings. For details, refer to page 30.	Normal	Mellow 1 – 3, Normal, Bright 1 – 3, User
	IAC		–	Turns the IAC effect on or off. For details about IAC, refer to page 17. 	On	On, Off
	IAC depth		(Pop-up window)	Determines the depth of the IAC. The higher the value, the more clearly the low/high sounds at lower volume levels. 	0	−3 – +3
	Binaural		–	Turns the Binaural Sampling function (when headphones are connected) on or off. When the function is on and headphones are connected, the sound from this instrument changes to the sound of Binaural Sampling or the sound enhanced with the Stereophonic Optimizer, allowing you to enjoy more realistic sound (page 18).
NOTE
When the “Speaker” setting (page 88) is on, this function will always be disabled even when headphones are connected.	On	On, Off
MIDI	MIDI OUT		(Setting display)	Determines the MIDI channel on which the MIDI messages generated via the keyboard performance will be transmitted from the MIDI [OUT] or USB [TO HOST] terminal. When Duo is on, the MIDI channels are assigned as follows.
• Performance on the Right section = n (setting value)
• Performance on the Left section = n+1	Ch1	Ch1 – Ch16, Off (not transmitted)
	MIDI IN		(Setting display)	Determines which part of the instrument will be controlled by each channel data of the MIDI messages coming from the MIDI [IN] and USB [TO HOST] terminal. 
• Song: Song part is controlled by the MIDI messages. 
• Keyboard: The entire keyboard is controlled regardless of the Duo setting.
• R: When Duo is off, the entire keyboard is controlled. When Duo is on, the keyboard performance on the Right section is controlled.
• L: When Duo is on, the keyboard performance on the Left section is controlled.
• Off: No part is controlled.	“Song” for each of all MIDI channels	For each MIDI channel:
• Song
• Keyboard
• R
• L
• Off 
	Local Control		–	“Local Control On” is a state in which this instrument produces the sound from its tone generator when you play the keyboard. In “Local Control Off” state, the keyboard and the tone generator are cut off from each other. This means that even if you play the keyboard, this instrument will produce no sound. Instead, the keyboard data can be transmitted via MIDI to a connected MIDI device or computer, which can produce the sound. The “Local Control Off” setting is useful when you wish to play only an external sound source while playing the keys on this instrument.	On	On, Off
	Receive Param.		(Setting display)	Determines which types of MIDI messages can be received or recognized by this instrument. 
MIDI message types:
Note on/off, Control Change, Program Change, Pitch Bend, System Exclusive	On (for all the MIDI messages)	On, Off (for each MIDI message) 
	Transmit Param.		(Setting display)	Determines which types of MIDI messages can be transmitted from this instrument. 
MIDI message types:
Note on/off, Control Change, Program Change, Pitch Bend, SystemRealTime, System Exclusive	On (for all the messages)	On, Off (for each message) 
	Initial Setup		Cancel	Transmits the current panel settings such as Voice selection to a connected MIDI device or computer. Before you start recording your performance to a connected MIDI device or computer, execute this operation to record the current panel settings at the beginning of your performance data. It causes that the same panel settings are called up when the recorded performance is played back. 
Operation:
Move the highlight to “Execute,” then press the [Cursor right] button to transmit the panel settings as MIDI messages.	–	–
			Execute			
Backup	Backup Setting		–	For instructions about these functions, refer to pages 92–93.	–	–
	Backup		–			
	Restore		–			
	Factory Reset		–			
Utility	USB Format		Cancel	This lets you format or initialize the USB flash drive connected to the [USB TO DEVICE] terminal.
NOTICE
Executing the Format operation will delete all data saved in the USB flash drive. Save important data to a computer or another storage device.
NOTE
When connecting the USB flash drive to the [USB TO DEVICE] terminal, a message prompting you to execute the Format operation may appear. If such a case occurs, execute the Format operation.
Operation
Move the highlight to “Execute,” then press the [Cursor right] button to start the Format operation. After Formatting is completed, a message appears then the instrument returns to the Utility display after a while.
NOTICE
Never turn off the power or disconnect the USB flash drive while “Executing” is shown in the display.	–	–
			Execute		–	–
	USB Properties		–	Shows the amount of free space and entire memory in the USB flash drive connected to the [USB TO DEVICE] terminal. 
(Figure) 
Amount of entire memory
Amount of free space 	–	–
	USB Autoload		–	When this is set to “On,” the Song saved in the root directory can be selected (shown on the display) automatically as soon as the USB flash drive is connected to the [USB TO DEVICE] terminal. 	Off	On, Off
	Speaker		(Setting display)	Lets you switch the speaker on/off.
• Normal: The speaker will sound only if headphones are not connected.
• On: The speaker will always sound.
• Off: The speaker will not sound.
NOTE
When this setting is on, “Binaural” (page 86) will always be disabled.	Normal 	Normal, On, Off
	Contrast		(Pop-up window)	Adjusts the contrast of the display.	0	−5 – +5
	Auto Power Off		(Setting display)	Lets you set the amount of time that elapses before the power is turned off by Auto Power Off function (page 16). To disable Auto Power Off, select “Off.”
Disabling Auto Power Off 
(Figure) 
The lowest key (A−1)
Turn the power on while holding down the lowest key on the keyboard. A message appears briefly and Auto Power Off is disabled.	30 (minutes)	Off, 5, 10, 15, 30, 60, 120 (minutes)
	Audio Loopback		–	Determines whether audio input from the connected computer or smart device is output to a computer or a smart device or not (page 66).	On	On, Off
Utility	Version		–	Displays the model name and the firmware version of this instrument.	–	–
	Auto Backlight Off		(Setting display)	Lets you set the time that elapses until the control panel and the display turn off, or lets you set them to remain on indefinitely (the “Off” setting).	10 (seconds)	Off, 10, 20, 30, 60 (seconds)
	Touch Panel Sound		–	Determines whether a sound is made when the control panel is operated (the “on” setting), or whether no sound is heard (the “off” setting).	On	On, Off
	Language		System	Determines the type of characters shown on the display for the System (general indication other than Song name) and Song (Song name) individually.
Character list:
	International	Japanese, International
			Song			
	Wireless LAN			These parameters are shown only when the USB wireless LAN adaptor UD-WL01 (sold separately) is connected to the [USB TO DEVICE] terminal on this instrument. For details, refer to page 90.		
	Wireless LAN Option					
(Table end)

Scale Tune List (Temperament List)
(Table)
Equal (Equal Temperament)	One octave is divided into twelve equal intervals. Currently most popular piano tuning scale.
PureMajor/PureMinor	Based on natural overtones, three major chords using these scales produce a beautiful, pure sound.
Pythag. (Pythagorean)	This scale was devised by Pythagoras, the famous Greek philosopher and is created from a series of perfect fifths, which are collapsed into a single octave. The 3rd in this tuning is slightly unstable, but the 4th and 5th are beautiful and suitable for some leads.
MeanTone	This scale was created as an improvement on the Pythagorean scale, by making the major third interval more “in tune.” It was especially popular from the 16th century to the 18th century. Handel, among others, used this scale.
Werck. (Werckmeister)/Kirnberger	These scales combine Mean Tone and Pythagorean in different ways. With these scales, modulation changes the impression and feel of the Songs. They were often used in the era of Bach and Beethoven. They are also often used now to reproduce the music of that era on harpsichords.
(Table end)

Wireless LAN Settings
The following parameters are shown only when the USB wireless LAN adaptor UD-WL01 (sold separately) is connected to the [USB TO DEVICE] terminal on this instrument. For details on setting procedures, refer to page 71.
* “Wireless LAN” parameters differ depending on the “Wireless LAN Mode” setting (“Infrastructure” or “Accesspoint”). By default, it is set to “Infrastructure.”

(Table)
To call up the desired parameter:
Press the [Menu] button several times to select “System” menu, then use the [Cursor up]/[Cursor down]/[Cursor left]/[Cursor right] buttons to select the desired parameter.							
[Cursor right][Cursor left]	[Cursor right][Cursor left]	[Cursor right][Cursor left]	[Cursor right][Cursor left]	[Cursor right][Cursor left]	Description	Default setting	Setting range
Utility	Wireless LAN* (In the “Infrastructure” mode)	Select Network	(Networks)		Connect to an access point by selecting the network.	–	–
			Other	SSID	Set the SSID.	–	Up to 32 characters (half size), alphanumeric characters, marks
				Security	Set the Security.	NONE	NONE, WEP,  WPA2-PSK (AES), WPA/WPA2 mixed PSK
				Password	Set the Password.	–	Up to 64 characters (half size), alphanumeric characters, marks
				Connect	Connect using the settings in “Other” display.	–	–
		Detail	DHCP		Set the wireless LAN detailed settings. IP Address, Subnet Mask, Gateway, DNS Server1, DNS Server2 can be set when DHCP is set to Off while cannot be set when DHCP set to On. Use the [Cursor left]/[Cursor right] buttons to select each octet in the entry display, then enter the value using the [Cursor up]/[Cursor down] buttons. To finalize the setting, press the [Menu] button.	On	On/Off
			IP Address			0.0.0.0	0.0.0.0-255.255.255.255
			Subnet Mask			0.0.0.0	0.0.0.0-255.255.255.255
			Gateway			0.0.0.0	0.0.0.0-255.255.255.255
			DNS Server1			0.0.0.0	0.0.0.0-255.255.255.255
			DNS Server2			0.0.0.0	0.0.0.0-255.255.255.255
			Save		Save the settings in the “Detail” display. Move the highlight to “Save,” then press the [Cursor right] button to execute the Saving.	–	–
	Wireless LAN* (In the “Accesspoint” mode)	SSID			Set the SSID as an access point.	ap-[NU1XA]-[xxxxxx (MAC address lower 6 figure)]	Up to 32 characters (half size), alphanumeric characters, marks
		Security			Set the Security as an access point.	NONE	NONE, WEP, WPA2-PSK (AES), WPA/WPA2 mixed PSK
		Password			Set the Password as an access point.	–	Up to 64 characters (half size), alphanumeric characters, marks
Utility	Wireless LAN* (In the “Accesspoint” mode)	Channel			Set the channel as an access point.	11	Differs depending on the USB wireless LAN adaptor models.
• Models for United States and Canada: 1 – 11
• Others: 1 – 13
When no USB wireless LAN adaptor is connected, setting range is channels 1 – 13.
		DHCP Server			Set the IP address related settings.	On	On, Off
		IP Address				192.168.0.1	192. 168. 0-255. 1-254.
		Subnet Mask				255.255.255.0	255.255.0.0, 255.255.128.0, 255.255.192.0, 255.255.224.0, 255.255.240.0, 255.255.248.0, 255.255.252.0, 255.255.254.0, 255.255.255.0
		Save			Save the settings you set in the Wireless LAN display (in the “Accesspoint” mode)	–	–
	Wireless LAN Option	Wireless LAN Mode	Infrastructure Mode		Determines whether the access point is used for wireless LAN connection (Infrastructure Mode) or not (Accesspoint Mode). 	Infrastructure Mode	–
			Accesspoint Mode				
		Initialize	Cancel 		Initialize the settings in the wireless LAN display. Move the highlight to “Execute,” then press the [Cursor right] button to execute the initialization.	Cancel 	–
			Execute				
		Detail	Host Name		Set the Host name.	[NU1XA]-[xxxxxx (MAC address lower 6 figure)]	Up to 57 characters (half size) including alphanumeric characters, the “_” (underscore) and “-” (hyphen) character.
			Mac Address		Display the MAC address of the USB wireless LAN adaptor.	–	–
			Status		Display the error code of network function. 	–	–
(Table end)


Backup Setting (Selecting parameters maintained even when the power is turned off)
This lets you set whether some settings of the Backup Setting (below) are maintained or not when the power is turned off. The Backup Setting consists of two groups, “Voice” (including Voice related settings such as Voice selection) and “Other” (including various settings such as Song Repeat and Tuning), which can be set individually.

Data and settings maintained even when the power is turned off
• User MIDI Song (saved in this instrument’s “User” memory)
• System menu (page 85)
Bluetooth On/Off *
Keyboard (Duo Type only)
Utility
• Backup Setting (explained here)

* For information on whether Bluetooth functionality is included with the instrument or not, refer to page 67.

1	Press the [Menu] button several times to select the “System” menu (page 76).

2	Use the [Cursor up]/[Cursor down] buttons to select “Backup,” use the [Cursor right] button to call up the next display, then use the [Cursor up]/[Cursor down] buttons to select “Backup Setting.”

3	Use the [Cursor right] then the [Cursor up]/[Cursor down] buttons to select “Voice,” then use the [Cursor right] button to select “On” or “Off.”
The “Voice” selection here contains the following settings:
• Voice selection 
• All the parameters other than Transpose in the “Voice” menu

4	Use the [Cursor up]/[Cursor down] buttons to select “Other,” then use the [Cursor right] button to select “On” or “Off.”
The “Other” selection here contains the following settings:
• Split point
• In the “Song” menu: Song Repeat, Volume (Song-Keyboard), Audio Volume, Quick Play, Play Track
• In the “Metronome” menu: Volume, BPM, Bell On/Off
• In the “System” menu: Tuning, Keyboard (except “Duo” and “Duo Type”), Pedal, Sound, MIDI

5	Press the [Exit] button to exit from the “System” menu. 


Backup (Saving the Backup file for internal data)
This lets you save data on internal memory to the connected USB flash drive as a backup file (named “NU1XA.bup”). This backup file can be loaded to the instrument via the Restore function (page 93) for future.

NOTICE
• It may take 1 – 2 minutes to complete this operation. Never turn off the power during this operation (while “Executing” is shown). 
• If the same backup file (NU1XA.bup) is already saved in the USB flash drive, this operation will overwrite or replace this file with new one.

1	Connect the USB flash drive to the [USB TO DEVICE] terminal.

2	Press the [Menu] button several times to select the “System” menu (page 76).

3	Use the [Cursor up]/[Cursor down] buttons to select “Backup,” use the [Cursor right] button to call up the next display, then use the [Cursor up]/[Cursor down] buttons to select “Backup.”

4	Use the [Cursor right] button to call up the next display, then use the [Cursor up]/[Cursor down] buttons to select “Execute.”

5	Press the [Cursor right] button to execute the Backup operation.

6	Press the [Exit] button to exit from the “System” menu.

NOTE
When you want to restore the settings in the backup file, execute the Restore function (page 93).


Restore (Restarting the instrument with the Backup file loaded)
This lets you load the backup file (NU1XA.bup) saved via the Backup function (page 92) to the instrument on.

NOTICE
• It may take 1 – 2 minutes to complete this operation. Never turn off the power during this operation (while “Executing” is shown). Doing so could result in damage to the data.
• If recorded Songs reside on “User” memory, make sure to move the Songs to the USB flash drive by following the instructions page 60 before executing this operation. If you do not, the Songs will be deleted via this operation.

1	Connect the USB flash drive containing the Backup file to the [USB TO DEVICE] terminal.

2	Press the [Menu] button several times to select the “System” menu (page 76).

3	Use the [Cursor up]/[Cursor down] buttons to select “Backup,” use the [Cursor right] button to call up the next display, then use the [Cursor up]/[Cursor down] buttons to select “Restore.”

4	Use the [Cursor right] button to call up the next display, then use the [Cursor up]/[Cursor down] buttons to select “Execute.”

5	Press the [Cursor right] button to execute the Restore operation.

A message indicating that the operation is completed appears, then the instrument will restart after a while.


Factory Reset (Restarting the instrument with the initial factory settings loaded)
This lets you reset this instrument to its factory default settings which refers to the initial setting preprogrammed when shipped from the factory, and is called up when you first turn on the power to this instrument.

Note that the following points.
• This operation resets the Backup Setting (page 92) to the default setting.
• This operation will not delete the Songs saved in the User folder.
• This operation will not delete the Bluetooth* pairing information (page 68).
* For information on whether Bluetooth functionality is included with the instrument or not, refer to page 67.

NOTICE
Never turn off the power during this operation (while “Factory reset executing” is shown). Doing so could result in damage to the data.

1	Press the [Menu] button several times to select the “System” menu (page 76).

2	Use the [Cursor up]/[Cursor down] buttons to select “Backup,” use the [Cursor right] button to call up the next display, then use the [Cursor up]/[Cursor down] buttons to select “Factory Reset.”

3	Use the [Cursor right] button to call up the next display, then use the [Cursor up]/[Cursor down] buttons to select “Execute.”

4	Press the [Cursor right] button to execute the Restore operation.

A message indicating that the operation is completed appears, then the instrument will restart after a while.

Alternate method for restoring the default settings
Press and hold down the white key on the right end (C7) and press the [Standby/On] switch to turn on the power to this instrument. This operation will not delete any Songs in the User folder or the Bluetooth pairing information.
(Figure)
C7
[Standby/On] switch


This is the end of the file.